General Instructions
After all saltwater usage, reels should be rinsed with lukewarm water and allowed to dry.

Mooching and Fly Reels
Cleaning Instructions

• Disassemble your reel and remove clutch (if applicable)
• Clean the inside of your reel with the soft cloth / swabs (save one to spread oil on the clutch cork)
• Remove old oil, grease and accumulated grit

Grease these areas

• Base of spindle where it meets the frame
• Areas where parts rub against each other (where springs meet clickers)
• Bearings – back of clutch, front of spool, back of spool
• Teeth of the clutch or gear

Oil these areas

• Pivot points (pawls, clickers, springs)
• Cork on the clutch surface.

Centerpin Float Reels
Cleaning Instructions

• Disassemble your reel
• Clean the inside of your reel and remove old oil, grease and accumulated grit with the soft cloth/swabs.

Grease these areas

• Between the clicker and spring
• Teeth of the gear
• Between the cam and cam arm (Searun)

Oil these areas

• Clicker pivot screw and other pivot screws
• Spindle base
• Bearings (front and back of spool)
• O-ring on the back of the spindle screw
• Underneath the clicker button (IS)
• Cam detent and surrounding area (Searun)